7 Heavy Equipment Operator Safety Tips

7 Heavy Equipment Operator Safety Tips

Fatalities in a site is common, but not very often do the authorities take the responsibility to protect the laborers and other people present on-site. OSHA states that it is due to runovers, backover, vehicle collisions, and people hitting pinned equipment or objects, that almost all fatalities within a job site occur. It is important to keep the heavy equipment operators educated about the fatalities the machine could bring and the tips they must follow in order to stay safe and keep everyone else on the job site away from unfortunate accidents. What may seem as redundant at this point is indeed imperative to be discussed on-site with everyone present there. The standard operator guidelines and rules have to be reviewed regularly to keep the crew safe. Here is a list of safety tips that need to be followed by every heavy equipment operator when working.

1.      Check the Equipment Properly

Diligence is a factor that determines the quality of work that goes on the site; be it in finishing the day’s work or inspecting the equipment. Check for any defects on the equipment and see if anything needs to be changed in order to meet the OSHA requirements. Go through every point on your checklist and make sure if all components are working efficiently, including the hydraulic hoses and oil levels.

2.      Underground Utilities and Power lines Have to be Identified in Advance

Personal-protection

All low clearance obstructions and power lines have to be identified before starting with the work. Make sure to double-check these aspects when you arrive at a new job site. Underground utilities such as gas, sewer, water, and electric lines have to be marked with color-coded flags.

3.      Mounting and Dismounting

Falling from the equipment while stepping on or off causes the major number of accidents on the job site. So, make sure to have three-point-contact when you mount and dismount the equipment. You shouldn’t jump off it.

4.      Seatbelt is Compulsory

Sear belt

When you are moving slowly in the machine, seatbelt might not feel necessary. But by wearing it, you are keeping yourself safe from danger. Buckle up and ensure safety with the belt protecting you from the jerks and rollovers.

5.      Blind Spots Have to Be Checked

You must watch your blind spots when operating the equipment. A spotter can help you with this more than relying on your visual periphery. By doing so, you get an idea on what areas to cover and how to get the equipment riding without meeting up with any accidents.

6.      Hand Signals and Radio are Best for Communication

You could always use a two-way radio to communicate with the spotter or use hand signals when you don’t have a radio in hand.

7.      Loading and Unloading the Equipment Have to be Done with Care

 

The level ground has to be kept while loading and unloading the equipment. Chances for the equipment to slide over or roll away are reduced by doing this.

 

Mark J. Schmidt

Leave a Reply

Your email address will not be published. Required fields are marked *